PartSnap 3D Printing builds its highest resolution parts and prototypes using Objet’s PolyJet  Resin in the following options:

Default PolyJet (No purge fee), lowest cost, high-resolution option
PolyJet White (VeroWhitePlus), a rigid, white material
PolyJet Blue (VeroBlue), a rigid, blue-gray material
PolyJet Gray (VeroGray), a rigid, light-gray material
PolyJet Clear (VeroClear), a rigid, frosted-clear material
PolyJet Black (VeroBlackPlus), a rigid, black material
PolyJet Tan (VeroDent), a rigid, tan material often used for dental models
PolyJet High-Temp (VeroFiero), a very rigid, off-white material
PolyJet Polypropylene-like (Endur), a flexible PP-like material

These materials are mechanically equivalent:

PolyJet High-Resolution Materials
Property ASTM (imperial) White, Gray, Black, Tan, Blue, Clear High-Temp
Tensile Strength D-638-03 psi 7,250-9,450 psi 10,000-11,500
Modulus of Elasticity D-638-04 psi 290,000-435,000 psi 465,000-510,000
Elongation at Break D-638-05 % 10-25 % 10-15
Flexural Strength D-790-03 psi 11,000-16,000 psi 16,000-19,000
Flexural Modulus D-790-04 psi 320,000-465,000 psi 450,000-510,000
Izod Notched Impact D-256-06 ft lb/in 0.375-0.562 ft lb/in 0.262-0.300
HDT at 0.45 Mpa D-648-06 F 113-122 F 145-163
Water Absorption D570-98 24 Hr % 1.17-1.19 % 1.2-1.4
PolyJet High-Resolution Materials
Property ASTM (metric) White, Gray, Black, Tan, Blue, Clear High-Temp
Tensile Strength D-638-03 MPa 50-65 MPa 70-80
Modulus of Elasticity D-638-04 MPa 2000-3000 MPa 3200-3500
Elongation at Break D-638-05 % 10-25 % 10-15
Flexural Strength D-790-03 MPa 75-110 MPa 110-130
Flexural Modulus D-790-04 MPa 2,200-3,200 MPa 3,100-3,500
Izod Notched Impact D-256-06 J/m 20-30 J/m 14-16
HDT at 0.45 Mpa D-648-06 C 45-50 C 63-67
Water Absorption D570-98 24 Hr % 1.17-1.19 % 1.2-1.4

 

Strengths:

  • Perfect material to validate injection molded part design
  • Completely Air-tight / Water-tight for functional testing of sealed products
  • Excellent Geometric Accuracy (typically +/- 0.004in overall)
  • Excellent Detail: build layers of 28um (0.001 inches ensure high level of detail)
  • Good tensile strength
  • VeroClear provides a translucent/clear finish for see-through parts
Weaknesses:
PartSnap 3D Printing Colors Finishes 150x150 3D Printing Materials: Objet PolyJet Rigid Plastic
  • Poor impact strength (use FDM for higher impact strength)
  • Poor heat resistance

See some of the 3D printing colors & finishes available.  Also, if the PolyJet material properties do not meet your engineering requirements for functional testing, contact us regarding our FDM 3D Printing capabilities.

Ready to order?  Get Instant Pricing on 3D Printing and Buy Online